8 same-day spring replacements available per day Call (725) 485-3587
Prestige Garage Door Services Let us get your door working(725) 485-3587

Blog

DASMA's June 26 ANSI Canvass Notice on Garage Door Standards: Does a Las Vegas Homeowner Need To Act?

On June 26, DASMA announced an ANSI canvass process to revise several garage door standards, including ones that affect structural performance and section interfaces. Las Vegas homeowners do not have to rush to replace doors, but this shift will slowly change how new doors are designed, tested and repaired.

Call (725) 485-3587

Prestige Garage Door Services technician at work in a Las Vegas garage, with a replacement torsion spring, shaft and cable drums laid out on the floor.
Timeline showing DASMA's June 26 canvass, 2024 code start in Clark County, future standard adoption, and homeowner maintenance actions over time.Garage Door Rules ShiftHow the June 26 DASMA canvass affects Las Vegas2026-06-26DASMA canvassopens2026-01-11Code update inClark Co.2 to 3 yearsFuture adoptioncycleAfter adoptionNew door designsappearOngoingHomeowner actionsLas Vegas owners should maintain doors now and watch codes, not replace doors early.

What exactly did DASMA announce on June 26 and why is it newsworthy in Las Vegas?

On June 26, the Door and Access Systems Manufacturers Association posted a formal call for participants for several standards projects under the ANSI canvass process. According to DASMA's notice, the group is revising or developing multiple standards, including DASMA 105 on thermal transmittance and air infiltration, DASMA 108 and 109, DASMA 115 on structural performance under missile impact and cyclic wind pressure, and DASMA 116 on section interfaces for residential garage door systems. This is an early, technical step, but it tells us where manufacturers and engineers are putting their attention.

For a Las Vegas homeowner or landlord, this matters because ANSI approved DASMA standards often become the backbone of how new garage doors are designed, tested and labeled. Over time, building codes and local permitting offices tend to lean on these standards when they decide what wind, impact or thermal performance a product has to show on paper. In a valley that sees strong wind events, dust and big temperature swings, the specifics of structural and interface standards can affect how well a door holds up and how safely it interacts with your opener.

The canvass process will take time, so nothing changes overnight on the homeowner side. That said, it is easier to plan repairs and replacements when you understand that the industry is tightening and clarifying how doors should perform in high wind and impact conditions. Knowing that DASMA 115 and 116 are on the table helps you ask better questions when you talk with a garage door repair company about a damaged section, a misaligned track or visible flexing in the door during a wind gust.

How could the new DASMA standards eventually interact with Las Vegas and Clark County codes?

Clark County has already moved to newer baseline codes, adopting the 2024 International Building Code and 2024 International Residential Code with local amendments. The county's Building and Fire Prevention Department notes that these 2024 codes took effect for permit applications on January 11, 2026, and they govern things like wind load and structural design for new work. When DASMA revises its structural and section interface standards, those documents can later be referenced in code commentary, in manufacturer engineering and in the technical material a contractor submits for a permit.

In practical terms, this means that future replacement garage doors that require a permit, especially in wind sensitive parts of the valley, may need to show compliance with test methods such as those in a revised DASMA 115 or related documents. While the county's current notice does not mention these specific DASMA numbers, the direction of travel is clear: newer codes and updated manufacturer standards tend to move together. That affects the labels you will see on a door and the engineering documentation behind it.

Routine garage door repair usually falls outside of full new door permitting, but code expectations still set the backdrop. A technician working on a bent section, twisted track or failed reinforcement strut needs to think about how that door would behave under the wind and pressure assumptions that the local code uses. As the DASMA standards are updated and manufacturers adjust their products, some older parts may be superseded by beefier hardware or different interface designs. A homeowner who understands that connection will be better prepared for conversations about why a repair might involve upgraded reinforcement or bracing rather than one for one replacement of older components.

Does a Las Vegas homeowner need to replace a garage door because of this DASMA canvass notice?

You do not need to replace a working residential garage door in Las Vegas just because DASMA has started revising its standards. The June 26 notification is a technical milestone aimed at manufacturers, labs and engineers who want to participate in the standards work. Nothing in the notice states that existing installed doors are suddenly unacceptable, and no local code update has said that current doors in service must be swapped out solely due to this canvass.

The main time these evolving standards touch a homeowner directly is when you are already planning a significant change. If you are replacing a full door, repairing extensive wind damage or making structural changes that trigger a permit, that is when current codes and manufacturer test data come into play. At that point, working with a contractor who is familiar with DASMA guidance and Clark County's current code cycle helps you avoid surprises.

There is one important exception for acting sooner rather than later, and it is not about DASMA 115 or 116. Opener safety requirements tied to 16 CFR Part 1211, which incorporates UL 325, have long required basic entrapment protection. These rules apply to openers manufactured on or after January 1, 1991, and they require secondary entrapment protection such as photo eyes on openers manufactured on or after January 1, 1993. If your opener predates those protections or is missing photo eyes, that is a safety concern worth addressing now with a qualified garage door repair technician, regardless of the newer structural standards in the pipeline.

What should you watch for during garage door repair as standards evolve?

If you are scheduling garage door repair in Las Vegas or Henderson, the most important thing to watch right now is whether the work is being done in a way that respects existing safety and structural expectations. That includes using proper reinforcement when installing or rehanging an opener on a wide insulated door, making sure hinges and struts are correctly sized, and verifying that tracks are anchored into solid framing, not just finish materials. While DASMA's canvass work on section interfaces and structural testing is still underway, the spirit of those standards is about predictable performance under real world conditions, including wind and impact.

Homeowners can safely perform a few checks before and after a repair, without getting into dangerous spring or cable work. You can confirm that photo eyes are aligned and mounted at the right height near the floor, test the safety reversal using a piece of lumber laid flat under the door, and visually look for obvious issues like a cracked section, missing fasteners or tracks that appear to be spreading. Anything that involves torsion springs, extension springs, lift cables, cable drums or bottom brackets should be left to a professional, because those parts hold the door's full weight under tension.

As doors and hardware gradually shift to reflect newer DASMA standards, you may notice differences compared with older equipment. Reinforcement struts can be heavier, fastener patterns may change, and interface designs between sections may be tweaked to improve performance in wind pressure or impact tests. None of this means your current door is unsafe by default, but it does mean that a repair might require compatible updated parts instead of an exact match to older components. Asking a licensed contractor to explain the options in plain language helps you choose between repairing a section and replacing more of the system when damage is significant.

How should Las Vegas homeowners prepare for future wind and structural updates without overreacting?

Preparing for future structural and wind related updates is mostly about good documentation and timely maintenance, not emergency replacement. Start by noting the make, model and approximate install year of your current garage door and opener. Take clear photos of the inside of the door that show labels, bracing and hardware. That information will make it easier for a garage door repair company to tell you whether your existing setup already aligns well with current expectations or whether a future replacement might deliver a meaningful improvement.

Because Clark County's adoption of the 2024 codes is already effective for new permits, and because DASMA is actively working on standards that relate to thermal and structural performance, it is also smart to think about the timing of bigger projects. If your door is clearly at the end of its life, dented from repeated wind hits or lacking modern safety features, scheduling a planned replacement on your own terms usually feels better than waiting until a failure forces your hand. That is particularly true in parts of the valley exposed to monsoon season winds and dust where garage doors see more stress.

In the meantime, focus on maintenance and safe operation. Keep the bottom seal in good shape so it can flex instead of tearing under wind driven grit, gently clean the photo eye lenses, and listen for new grinding or popping sounds that point to developing problems. Avoid attempting any adjustment of springs or cables yourself. When something feels off, use a company that is licensed, bonded and insured for overhead door work, such as Prestige Garage Door Services with Nevada contractor license 0091256, classification C-3D Overhead Doors, and ask for upfront pricing before work starts so you can weigh repair against replacement with a clear picture.

By the numbers

5DASMA standards in the June 26 canvass notice (per DASMA)
2026-06-26Date DASMA posted its call for participants (per DASMA)
2026-01-11Clark County effective date for 2024 codes on new permits (per Clark County)
2Key UL 325 related opener safety dates for entrapment protection (per the CPSC rule referencing 16 CFR Part 1211)

What a Las Vegas homeowner should do about it

  1. Write down the brand, model and visible label information from your existing garage door and opener so a contractor can compare it with current standards during any repair visit.
  2. Schedule a free inspection with a licensed garage door repair company if your door shows cracking panels, bent tracks or signs of wind flexing, since those issues tie directly into the structural concerns DASMA is revising.
  3. Test your opener's safety reversal and photo eyes using simple homeowner checks, and if either test fails, stop using the opener and call for garage door repair so the system can be evaluated under today's UL 325 related safety expectations.
  4. Ask your contractor whether any replacement sections, struts or hardware they propose match or exceed the current wind and structural performance that Clark County's 2024 codes expect for similar doors.
  5. If you are planning a full door replacement on a rental or heavily used home, talk through wind exposure, insulation and structural reinforcement options so the new door is well positioned for upcoming DASMA standard updates.
  6. Avoid any do it yourself work on torsion springs, extension springs, cables or bottom brackets, and instead rely on a professional who understands how counterbalance systems interact with door performance requirements.
  7. Keep basic maintenance up by cleaning photo eye lenses, checking that the bottom seal is intact and watching for new noises, so that small issues are caught and repaired before they turn into structural problems.
  8. When you request garage door repair, ask for upfront pricing and a written description of the work that notes any upgraded reinforcement, bracing or hardware being used in light of evolving DASMA and code expectations.
  9. For properties in more exposed parts of the valley, such as open edge neighborhoods, consider asking your contractor whether additional bracing or a higher wind performance door would offer meaningful benefits before the next big wind season.
  10. Save links or copies of key notices, such as the Clark County 2024 code adoption page and the DASMA canvass announcement, so you can refer to them if you want to understand why certain products or repair approaches are being recommended.

Related reading

Sources

Need garage door repair?

Call (725) 485-3587

Common questions

Do I need to replace my garage door because DASMA started revising standards on June 26?

You do not need to replace a working garage door solely because DASMA announced a canvass process on June 26. The notice invites participants to help revise standards that will influence future door design and testing. Your existing door remains governed by the codes and standards in effect when it was installed, unless a local authority specifically requires an upgrade for a permit.

Will Clark County make my current garage door illegal under the 2024 codes?

Clark County's adoption of the 2024 International Building Code and International Residential Code applies to new permit applications dated on or after January 11, 2026. Existing residential doors are generally allowed to remain in service unless there is a specific safety hazard or you apply for work that triggers new requirements. When you replace a door or do major structural work, the new installation must comply with the codes in effect at that time.

How do the DASMA 115 and 116 revisions affect garage door repair at my house?

DASMA 115 deals with structural performance under missile impact and cyclic wind pressure, and DASMA 116 addresses section interfaces on residential garage doors, according to the DASMA canvass notice. As these standards are revised and adopted, manufacturers may change how doors and sections are built and tested. For repair work, that can mean different reinforcement or section designs compared with older doors, so a technician may recommend parts that match the newer engineering rather than duplicating outdated components.

Is my old garage door opener still safe under UL 325 related rules?

Federal safety requirements that incorporate UL 325, found in 16 CFR Part 1211, apply to residential openers manufactured on or after January 1, 1991, and require secondary entrapment protection such as photo eyes on units made on or after January 1, 1993. If your opener predates those years, lacks photo eyes, or fails a reversal test, it may not meet current safety expectations. In that case, you should stop using it and have a garage door repair professional evaluate replacement options.

What should I ask a contractor about wind performance when repairing a damaged garage door section?

Ask whether the repaired door will maintain at least the same structural performance as it had when originally installed, especially for wind and impact. You can also ask if the replacement section, struts or tracks are tested or rated in line with current code assumptions for your area, given Clark County's move to the 2024 codes. A reputable contractor should be comfortable explaining how the chosen repair parts relate to wind load and structural behavior in plain language.

Can I safely realign my own garage door tracks to meet newer standards?

You should not attempt to realign tracks if the door is binding, off track or if any springs or cables appear loose or damaged. Track alignment directly affects how the door carries its weight, and improper adjustments can make the system unsafe, especially on heavier insulated doors. Simple checks like visually confirming that tracks are secure to framing and free of obvious obstructions are fine, but any actual adjustment should be handled by a professional garage door repair technician.

How do I know if my Las Vegas garage door needs repair before the next big wind event?

Look for visible signs such as cracked or bowed sections, loose or missing fasteners, tracks that seem to flare outward, or a door that rattles excessively in the opening. You can also listen for new grinding or popping sounds when the door moves, which may indicate stress on hinges or rollers. If you notice any of these issues, it is wise to have the door inspected and repaired before the wind season ramps up, so the system is in its best possible condition.

More on repairs and hiring

All 17 posts on repairs and hiring · Garage Door Repair in Las Vegas

Request a quote

Tell us what the door is doing and we will get back to you. Prefer to talk? Call (725) 485-3587.

24/7Emergency service
35+ yrsExperience
Family ownedLocal to the valley
NV 0091256Licensed, C-3D Overhead Doors
Bondedand insured
$0Trip fee, free inspections and estimates
UpfrontPrice before work starts
FinancingAvailable
WarrantiesOn our work, terms per job
All makesand models serviced